ASTM B117-19 & ISO 9227:2017-03 compliant

Stop weighing salt
Start running tests

Pre-measured, single-use corrosion testing salt

No scales, no mixing, no room for error

Get My Quote →Get Spec Sheet
PreciSalt single-use bag — 530g NaCl
530±2g
Precision fill, every single bag
40
Ready-to-use bags per pail
2
Standards met — ASTM & ISO
0
Scales or mixing required
The problem

Most labs still measure salt by hand

A few grams off from the exact 5% NaCl spec, and hours of chamber time — or a clean audit trail — are at risk.

Bulk NaCl — the old way

Manual prep, manual risk

  • Weigh salt by hand for every batch
  • Mix and dissolve to the correct 5% concentration
  • Re-check pH and specific gravity before every run
  • Store an open bulk container between tests
  • One measuring error can invalidate the test
PreciSalt — ready to pour

One bag, one test, zero guesswork

  • 530±2g pre-measured to spec, sealed per bag
  • Formulated to ASTM B117-19 & ISO 9227:2017-03
  • Consistent concentration, batch after batch
  • Individually sealed — nothing exposed until use
  • Certificate of Analysis included with every pail
How it works

From pail to chamber in four steps

10+ years running corrosion test chambers. This is the product we wished existed.

01

Open the pail

40 individually sealed bags, organized and ready — no bulk container to manage.

02

Take one bag

Each bag is pre-measured to 530±2g — exactly what one test requires.

03

Dissolve & pour

53g per liter of purified water gives you a precise 5% NaCl solution, every time.

04

Run the test

Run it knowing the one variable you used to worry about is already handled.

Compliance & documentation

The paperwork your audit needs, available anytime

Formulated to ASTM B117-19 and ISO 9227:2017-03, every batch is fully documented — COA, TDS, and SDS ready to download whenever you need them.

ASTM B117-19
ISO 9227:2017-03
Fill weight530 ± 2g
Concentration5% NaCl
Dilution ratio53g / liter purified water
Units per pail40 bags
Certificate of Analysis
Batch-specific COA, included with every order
↓
Technical Data Sheet
Full formulation & compliance detail
↓
Safety Data Sheet
MSDS / SDS for internal safety review
↓

PreciSalt complies with the requirements established by ASTM B117 and ISO 9227:

ASTM B117
Total impurities≤ 0.3%
Halides (bromides, fluorides, iodides) excluding chlorides< 0.1%
Copper< 0.3 ppm
Anti-caking agentsNone added
ISO 9227
Total impurities< 5%
Heavy metals (Cu, Ni, Pb)< 0.005%
Sodium iodide (NaI)< 0.1%
Request a quote

How many pails do you need?

PreciSalt is committed to protecting and respecting your privacy and we'll only use your personal information to administer your account and to provide the products and services you requested from us. In order to provide you with the requested content, we need to store and process your personal data.

From time to time, we would like to contact you about our products and services, as well as other content that may be of interest to you.

You may unsubscribe from these communications at any time. For more information on how to unsubscribe, our privacy practices, and how we are committed to protecting and respecting your privacy, please review our Privacy Policy.

Get My Quote →
FAQ

Common questions

Which standards does PreciSalt comply with?+
PreciSalt is formulated to meet ASTM B117-19 and ISO 9227:2017-03 salt spray/fog testing requirements.
How many tests does one pail cover?+
Each pail contains 40 individually sealed bags — one bag per test, pre-measured to 530±2g.
How is PreciSalt different from bulk reagent-grade NaCl?+
Bulk salt requires manual weighing and mixing for every test, introducing variance and risk. PreciSalt is pre-measured to spec and individually sealed, so every test starts identically.
What water quality is required to prepare the solution?+
Water should meet ASTM D1193-2006 (2018) purity standards. This ensures the solution reaches the exact concentration required by ASTM B117-19 and ISO 9227:2017-03.
Is PreciSalt a new company?+
PreciSalt is a new brand, built on over 10 years of hands-on experience selling and servicing corrosion test chambers across various industrial sectors. This product is the result of the manual-weighing hassle we experienced ourselves.

Get the document

Enter your details and we'll unlock it instantly.

✓

Thanks! Your document is ready.

Download Now ↓